MADS Smarty Programmer S-67 (07.5-09 Dodge)

°°° Do not use for prolonged high speed runs! Speeds exceeding approx 105 mph can result in high exhaust gas temperatures and damage the  Diesel Particulate Filter (DPF) !!! *** All even numbered softwares (2-4-6-8)without timing are to be used  for stacking with other after market power adding devices that also add their own timing. NO additional timing has to be used with the odd numbered softwares (1-3-5-7-9). Severe engine damage will result !!!Tested on stock trucks on our in houseDyno Dinamics Twin Retarder Dyno. Stock means just that. Stock! Even the air filters were stock…

We checked the “baseline” ( the stock truck Hp at the rear  wheels ) twice in a day in order to be sure about our findings.  The above declared HP numbers are all rounded down to the closest number. For example the 90 Hp file actually did 96 Hp. That’s a 90 Hp software for me, not a 100. The 170 Hp was 176.

ABS / Speedo recalibration The tire height can be adjusted up to 44″ in increments of 10 tenth of an inch in just a couple seconds. Of course, Smarty needs to be VIN# locked to the truck in order to get into the ABS adjustment section.

DTC Code reader

The name says it all. You can read and erase codes. Codes are displayed also in plain English. That’s old news by now. Smarty S-03 was the firstone to provide that utility, others found the idea to be a good one too. (Smarty does erase ABS codes too but does not display them)ECM update speed
Faster than anything else on the market! Again we’ve done our homework on the protocol. Less than5 minutes. Three times faster than a Star-Scan diagnostic tool or competitor.

We have developed our own bootloader in order to not have to pull fuses should an update become interrupted for any reason. All you have to do is to turn the key off / key on Smarty does everything else on it’s own.

Updates
The CaTCHER softwares as they are today are only a starting point. Expect major news in future. We’re for your feedback, opinions, likes, dislikes… We will make Smarty do what YOU want, TOGETHER.

MADS User Guide and Instructions

Will not work on 2010-2012 Cab & Chassis Trucks.

NOTE FROM SMARTY: This programmer will not support emission deletes or work with previous versions of emission delete software.